|
DS703A |
| DRO for X,Y-axis |
| Drilling range: Dia 0.3mm~3mm (the depth/diameter ratio is 300:1) |
| Drilling speed: 30mm~60mm per minute variable as per the different material |
| Can drill wire-cut starting hole, filter hole. jet hole, gas hole, group holes and hole of super depth etc. |
| Can drill small holes on the various conductive materials,even semiconductor material, especially stainless steel, chilled steel, copper, aluminium and hard alloy etc. |
| Can drill on oblique and curved surface directly |
| Can easily erode the drill and screw tap etc which is broken in the work piece and destroy the screw thread of the holes |
| The working water can be normal tap water or emulsified water and no pollution will be brought |
| The operation is easy and convenient |
|
Items |
Parameters |
| Electrode diameter |
Dia 0.3mm ~ 3mm |
| Spindle servo travel |
260mm |
| Spindle head travel |
160mm |
| Maximum spindle adjustable speed |
200mm/min |
| Rotation speed of rotary head |
40~45rpm |
| Working table size |
460x320mm |
| X,Y Working table travel |
350x250mm |
| Max. distance between guider and working table |
250mm |
| Height of working table above the ground |
1100mm |
| Max. current |
25A |
| Max. power consumption |
3KVA |
| Power supply |
380v/50Hz |
| Method of working fluid filter |
Micro gap |
| Work fluid |
Tap water |
| The Max. pressure of working fluid |
8Mpa |
| Capacity of working fluid tank |
10L |
| Machine size |
850x950x1800mm |
| Machine weight |
700kg |
|
